Aceleraciones de piso para diseño de elementos no estructurales y estructurales que no hacen parte del sistema de resistencia sísmica en edificios
Derechos de autor 2023 Revista Ingenierías Universidad de Medellín
Esta obra está bajo licencia internacional Creative Commons Reconocimiento-NoComercial-SinObrasDerivadas 4.0.
- Articles
- Enviado: octubre 5, 2017
-
Publicado: junio 27, 2018
Resumen
El propósito del artículo es evaluar el método usado en el Reglamento colombiano de construcción sismo resistente ( NSR-10) para calcular las aceleraciones de piso que son necesarias para diseñar elementos no estructurales y elementos estructurales que no hacen parte del sistema de resistencia sísmica. En el estudio se comparan las aceleraciones máximas de pisos calculadas con las normas NSR-10, ASCE 7-10, UBC-97, el Eurocódigo 8-04 y NZS 1170.5-04, con las aceleraciones máximas de piso medidas en especímenes ensayados en mesa vibratoria, y en edificaciones existentes durante sismos reales. En el artículo también se propone una modificación al método actualmente utilizado por la NSR-10. La modificación propuesta genera una estimación más acertada de las aceleraciones necesarias para diseñar estos elementos en edificios de mediana y gran altura. Las recomendaciones propuestas se fundamentan en los resultados de la evaluación del método usado actualmente en la NSR-10, el procedimiento usado en otras normas sismorresistentes, en resultados experimentales medidos en modelos de estructuras de concreto reforzado y en aceleraciones registradas en edificios instrumentados.
Referencias
[1] M. Rodríguez, J. Restrepo y J. Carr, “Earthquake-induced floor horizontal accelerations in buildings,” Journal of Earthquake Engineering and Structural Dynamics, vol. 31, pp. 693-718, 2002.
[2] J. Jaramillo, “Evaluación aproximada de la aceleración absoluta en sistema de múltiples grados de libertad considerando la participación de n formas modales,” Revista Internacional de Desastres Naturales, Accidentes e Infraestructura Civil, vol. 4, N°. 2, pp. 87-98, 2005.
[3] J. Carrillo y G. González, “Evaluación de la demanda sísmica fuera del plano en edificios,” Revista Ciencia e Ingeniería Neogranadina, vol. 15, pp. 44-61, 2005.
[4] NSR-10, Reglamento Colombiano de Construcción Sismo Resistente ‒NSR-10, Asociación Colombiana de Ingeniería Sísmica, AIS, Tomo 1, Bogotá, 2010.
[5] ASCE 7-10, Minimum design loads for buildings and other structures, ASCE/SEI 7-10, Reston, VA, 2010.
[6] UBC-97, “Uniform building code – Vol. 2: Structural engineering design provisions,” presentado en International Conference of Building Officials, Whittier, California, EE. UU., 1997.
[7] Eurocódigo 8-04, Design of structures for earthquake resistance, European Committee for Standardization, 2004.
[8] NZS 1170.5-04, New Zealand Standard: Structural design actions – Part 5: Earthquake actions. Standards, Nueva Zelanda, 2004.
[9] FEMA, Reducing de risks of nonstructural earthquake damage –A practical guide, FEME E-74, Washington, 2012.
[10] FEMA, NEHRP recommended provisions for seismic regulations for new buildings and other structures, Part 1: Provisions, FEMA 302, Washington, 1997.
[11] FEMA, NEHRP recommended provisions for seismic regulations for new buildings and other structures, Part 2: Commentary, FEMA 303, Washington, 1997.
[12] EngSolutions RCB, Structural software for analysis and design of reinforced concrete buildings for earthquake and wind forces, V8.5, EngSolutions, Inc., Florida, 2015.
[13] M. Sozen, S. Otani, P. Gulkan y N. Nielsen, “The University of Illinois earthquake simulator,” presentado en Proceedings of the 4th World Conference on Earthquake Engineering, Santiago de Chile, vol. III, 1969.
[14] A. Lepage, J. Shoemaker y A. Memari, “Accelerations of nonstructural components during nonlinear seismic response of multistory structures,” Journal of Architectural Engineering, ASCE, vol. 18, N°. 4, pp. 285-297, 2012.
[15] J. Aristizabal y M. Sozen, “Behavior of ten-story reinforced concrete walls subjected to earthquake motions”, Structural Research Series, N°. 431, Univ. of Illinois, Urbana, Illinois, 1976.
[16] J. Lybas y M. Sozen, “Effect of beam strength and stiffness on dynamic behavior of reinforced concrete coupled walls,” Structural Research Series, N°. 444, Univ. of Illinois, Urbana, Illinois, 1977.
[17] D. Abrams y M. Sozen, “Experimental study of frame-wall interaction in reinforced concrete structures subjected to strong earthquake motions,” Structural Research Series, n°. 460, Univ. of Illinois, Urbana, Illinois, 1979.
[18] J. Moehle y M. Sozen, “Experiments to study earthquake response of R/C structures with stiffness interruptions,” Structural Research Series, n°. 482, Univ. of Illinois, Urbana, Illinois, 1980.
[19] T. Healey y M. Sozen, “Experimental study of the dynamic response of a ten-story reinforced concrete frame with a tall first story,” Structural Research Series, n°. 450, Univ. of Illinois, Urbana, Illinois, 1978.
[20] J. Moehle y M. Sozen, “Earthquake simulations tests of a ten-story reinforced concrete frame with discontinued first-level beam,” Structural Research Series, n°. 451, Univ. of Illinois, Urbana, Illinois, 1978.
[21] H. Ceceen, “Response of ten-story reinforced concrete model frames to simulated earthquakes,” Ph.D. thesis, Univ. of Illinois, Urbana, Illinois, 1979.
[22] A. Schultz, “An experimental and analytical study of the earthquake response of R/C frames with yielding columns,” Ph.D. thesis, Univ. of Illinois, Urbana, Illinois, 1985.
[23] S. Wood, “Experiments to study the earthquake response of concrete frames with setbacks,” Ph.D. thesis, Univ. of Illinois, Urbana, Illinois, 1986.
[24] M. Eberhard y M. Sozen, “Experiments and analyses to study the seismic response of reinforced concrete frame-wall structures with yielding columns,” Structural Research Series No. 548, Univ. of Illinois, Urbana, Illinois, 1989.
[25] NEEShub, “The George E. Brown, Jr. Network for Earthquake Engineering Simulation,” [En línea], Disponible: https://nees.org/warehouse, 2017.
[26] CESMD, “Center for engineering strong motion data,”USGS, CGS, ANSS. [En línea], Disponible: https://www.strongmotioncenter.org, 2017.
[27] R. Drake y R. Bachman, “1994 NEHRP Provisions for Architectural, Mechanical, and Electrical Components,” presentado en Proceedings of the 5th U.S. National Conference on Earthquake Engineering, 1994.
[28] R. Drake y R. Bachman, “Interpretations of instrumented building seismic data and implications for building codes,” presentado en Proceedings of the 1995 SEAOC Annual Convention, 1995.
[29] R. Goel y A. Chopra, “Period Formulas for Moment-Resisting Frame Buildings,” Journal Structural Engineering, ASCE, vol. 123, N°. 11, pp. 1454-1461, 1997.